4 Port USB 3.1 Super-Speed Plus Hub with Type-C and A Ports
The CG-4P31CHUB USB 3.1 Type-C Hub is a light weight hub with a DIN Rail Mounting Kit. This hub supports USB 3.2 G2 Super-Speed Plus (10Gbps data transfer) with (2) USB Type-A female and (2) USB female Type-C downstream ports.
The CG-4P31CHUB USB 3.2 G2 Type-C Hub uses a 2-pin terminal block connection for input power of +7 – 24V DC for the downstream facing ports (power supply is included). It is backward compatible with 5Gbps (Super-Speed), 480Mbps(High-Speed), 12Mbps(Full-Speed), and 1.5Mbps(Low-Speed) data rates. The plastic mounting plate for the DIN Rail Clips snaps on to the bottom of the hub for secure mounting. Upstream information is carried with the USB-C connection on the back panel of the hub.
Note: This hub, although it supports battery charging spec1.2, does not have PD (power delivery) functionality.
4 Port USB 3.1 Gen2 Hub Features
- Compliant with USB 3.1 Gen2 Specifications
- Rigid plastic Wall and DIN Rail Mounting Case.
- Provides 4 (2 USB-C and 2 USB-A) Downstream facing USB 3.1 Ports
- Supports 10Gbps(Super-Speed Plus), 5Gbps (Super-Speed), 480Mbps(High-Speed), 12Mbps(Full-Speed), and 1.5Mbps(Low-Speed) data rates
- Multi Transaction Translators (TT) per Hub
- Support USB Battery Charging: SDP, CDP and DCP modes
- Built with the VLI VL820-Q8 chip
- Item Dimensions: 152.04mm(L) x 62.45mm(W) x 30mm(H) – 152.04mm(L) x 67.67mm(W) with 2-pin connector x 34.25(H) with mounting plate
Environmental Specifications
- Operating Temp: o to 70°C (32 to 158°F)
- Operating Humidity: 5 to 95% RH
Package Contents
- USB 3.1 Gen2 4 Port Hub
- 3ft. USB-C Male to Male Gen2 Cable
- Wall and DIN Rail Mounting Plate
- 12V 3 Amp Power Supply
- 4 rubber foot pads
- DIN Rail Mounting Kit
- User Manual